Competency-based learning - Educational Competencies

photo src: jacobspradlin.com

Competency-based learning or competency-based education and training is an approach to teaching and learning more often used in learning concrete skills than abstract learning. It differs from other non-related approaches in that the unit of learning is extremely fine grained. Rather than a course or a module every individual skill/learning outcome, known as a competency, is one single unit. Learners work on one competency at a time, which is likely a small component of a larger learning goal. The student is evaluated on the individual competency, and only once they have mastered it do they move on to others. After that, higher or more complex competencies are learned to a degree of mastery and isolated from other topics. Another common component of Competency-based learning is the ability to skip learning modules entirely if the learner can demonstrate they already have mastery. That can be done either through prior learning assessment or formative testing.

For example, people learning to drive manual transmission might first have to demonstrate their mastery of "rules of the road", safety, defensive driving, parallel parking etc. Then they may focus on two independent competencies: "using the clutch, brake with right foot" and "shifting up and down through the gears". Once the learners have demonstrated they are comfortable with those two skills the next, overarching skill might be "finding first: from full stop to a slow roll" followed by "sudden stops", "shifting up" and "down shifting". Because this is kinetic learning the instructor likely would demonstrate the individual skill a few times then the student would perform guided practice followed by independent practice until they can demonstrate their mastery.

Competency-based learning is learner-focused and works naturally with independent study and with the instructor in the role of facilitator. Learners often find different individual skills more difficult than others. This learning method allows a student to learn those individual skills they find challenging at their own pace, practising and refining as much as they like. Then, they can move rapidly through other skills to which they are more adept.

While most other learning methods use summative testing, competency-based learning requires mastery of every individual learning outcome, making it very well suited to learning credentials in which safety is an issue. With summative testing a student who has 80% in an evaluation may have an 80% mastery of all learning outcomes or may have no mastery what-so-ever of 20% of the learning outcomes. Further, this student may be permitted to move on to higher learning and still be missing some abilities that are crucial to that higher learning. For example, a student who knows most traffic laws and has mostly mastered controlling a vehicle could be treated equally to a student who has a very high mastery of vehicle control but no understanding of traffic laws, but only one of those students should be permitted to drive.

What it means to have mastered a competency depends on the learning domain (subject matter). In subject matter that could affect safety, it would be usual to expect complete learning that can be repeated every time. In abstract learning, such as algebra, the learner may only have to demonstrate that they identify an appropriate formula, for example, 4 of 5 times since when using that skill in the next competency, resolving a formula, will usually allow opportunity the learner to discover and correct their mistakes.

It is important to understand that this learning methodology is common in many kinetic and/or skills-based learning, but is also sometime applied to abstract and/or academic learning for students who find themselves out-of-step with their grade, course or program of study. Increasingly educational institutions are evaluating ways to include competency-based learning methodologies in many different types of programs in order to make learning success a constant while student pace can vary.

Competency-based learning is an educational technique that can be applied in many fields and learning environments. It is an area of pedagogical research and is not adequately understood in one, single learning domain, such as that which follows in this article.

The rest of this article focuses one application of competency-based learning in corporate environments and is heavily weighted to a Human Resources perspective.

Once organizations have used a competency dictionary to define the competency requirements for groups, areas, or the whole organization, it becomes possible to develop learning strategies targeted to close major gaps in organizational competencies and to focus learning plans on the business goals and strategic direction for the organization.

photo src: edinatech.blogspot.com

Maps, Directions, and Place Reviews

Best practices

Competency profiles assist in effective learning and development by identifying the behaviours, knowledge, skills and abilities that are necessary for successful performance in a job. Employees can assess their competencies against those required for their own job, or for another job in which they are interested, and then take steps to acquire or improve any necessary competencies.

Competencies support learning by:

• Focusing learning on the critical competencies needed for success in the job and organization
• Providing standards for measuring employee performance and capabilities
• Providing the framework for identifying learning options/curriculum/programs to meet employee and organizational needs
• Supporting effective forecasting of organizational, as well as project-related learning requirements
• Providing standards for determining how well learning has occurred, both at the individual and organizational level

Some of the common benchmark competency-based practices in learning and development are:

• Assessments against competencies - Once the competencies have been defined for particular job / roles, it becomes possible for employees and others to assess the employee's competencies against those required for current or future roles within the organization. This assessment can occur in the following ways:

• Self-assessment - Typically, the behavioral indicators for the competencies and proficiency levels needed within the target role / job are used as the standard for assessing the performance of the employee using a common rating scale (e.g., five-point scales from Never to Always) for assessing each indicator. The results are compiled and a report is provided that includes the results for all competencies, highlighting both employee strengths as well as competencies requiring improvement. This information can then be used to support the development of an individual learning plan (see below).

• Multi-source / 360 - Multi-source or 360-degree feedback is similar to the self-assessment process except there is more than one evaluator. The process includes at a minimum the employee and their supervisor, and can include others with whom the employee interacts within the workplace (e.g., peers, team members, clients both within and outside the organization, reporting employees; etc.). Once again, a report is prepared on the feedback results to allow the employee, supervisor and / or others (e.g., coach / mentor; learning advisor; etc.) to target learning and development efforts to the particular employee's needs.

Educational Competencies Video

Implementation stages

The following implementation stages are suggested for mid to large organizations implementing competencies in Learning and Development on a corporate-wide basis.

Stage 1

• Determine policy for integrating competencies in Learning and Development.
• Design individual learning tools and processes (Learning Plan Form; associated instructions / tools) and / or acquire tools to support individual Learning Planning (e.g., i-SkillSuite Assessment and Learning Plan modules).
• Build or acquire a catalogue of learning resources organized by competencies in the Dictionary and classify organization specific programs and tools in the catalogue. Advertise and make the catalogue widely available to employees and managers (e.g., post the catalogue on an intranet site; acquire and implement web-based software to support employee).
• Develop or acquire self-assessment and multi-source surveys and reporting processes as competency profiles become available for job groups (e.g., i-SkillSuite Assessment and Learning Plan modules). Post self-assessment tools on the organization's intranet website, and introduce supervisor and multi-source assessments as employees become familiar and comfortable with the competencies and the assessment process.
• Develop and introduce training / communications related to competencies and their use in the learning and development process in the organization.

Stage 2

• Conduct a needs assessment / analysis and design / develop tools and reporting processes to support aggregate analysis and reporting of organizational strengths and gaps in competencies.
• Assess how curriculum / learning program design and development could be improved with the introduction of competency-based management. Implement changes, as required.
• Review current processes for conducting evaluations of learning programs within the organization and integrate competencies, as required, to determine: the extent to which workplace behaviour and outcomes have changed in the desired direction; as well as, the return on investment for the learning / training provided.

Schools with this system

Adams county school district 50 and the Chugach School District are a part of the Competency-based learning project but have their own name called Re-Inventing schools coalition (RISC). They have replaced grade levels with 10 learning levels that students work through at their own pace. Western Governors University (WGU), has used this model of learning since it was chartered in 1996 by 19 governors in the Western United States.

Other institutions are also offering competency-based approaches to postsecondary degrees. Capella University's FlexPath bachelor's and M.B.A. program was the second direct assessment degree to be given the go-ahead by the Department of Education. Southern New Hampshire University developed a competency-based pathway to an associate or bachelor's degree through College for America, launched in 2013. Additionally, the University of Wisconsin-Extension's Flex Option provides a competency-based approach to earning a bachelor's degree. Since 1971, the Upper Valley Educator's Institute in Lebanon, NH has offered a teacher certification program that is competency based, and now offers a competency based Master in Arts in Teaching (MAT).

photo src: mfeldstein.com

Competency Based Learning In Medical Practice

A series of peer reviewed research articles have been examined that study Canadian based medical residency programs, that have implemented competency based learning as their primary model of education.

References:

Charles, L., Triscott, J., Dobbs, B., Tian, P.G., & Babenko, O. (2016). Effectiveness of a core competency-based program on residents learning and experience. Can Geriatr J, 19(2), 50-57.

Knox, A.D., Gilardino, M.S., Kisten, S.J., Warren, R.J., & Anastakis, D.J. (2014). Competency-based medical education for plastic surgery: where do we begin. Plast Reconstr Surg, 133(5), 702-710.

  Nguyen, V.T, & Losee, J.E.(2016). Time-versus competency-based residency training. Plast Reconstr Surg, 138(2), 527-531.  

Nousiainen, M.T., McQueen, S.A., Hall, J., Kraemer, W., Ferguson, P., & Sonnadara, R. (2016). Resident education in orthopaedic trauma: the future role of competency-based medical education. Bone Joint J, 98(10), 1320-1325.

These articles agree that competency based learning speaks to an iterative approach in that the student (resident) is expected to complete one competence successfully before advancing forward and building their repertoire of skills (Charles et al., 2016). This method of learning is tailored to each student as it allows learning to unfold at an individual's own pace, which has appeared to be a successful model for many residency programs across Canada.

Source of the article : Wikipedia